Home and desk
This tool generates a wall-mounted planter with a Vienna cane pattern and exports it as STL. It has three parts: a cane sleeve, an inner pot for the soil and a one-piece hidden rail. Pick round, square or rectangular and set the size in millimetres.
As on a chair back, the cane panel sits recessed in a frame. Paired vertical and horizontal strands and single diagonals pass over and under each other, and the octagonal openings form between them. Open cane shows a dark inner pot through the openings, relief makes them blind pits, plain keeps only the recessed panel.
Free, no sign-up. Change the sizes in millimetres and download the STL.
Each variant is the same template with different settings. Follow the link and the editor opens with those values.
Shape: Rectangle · Width: 170 mm · Depth: 100 mm +2
Open this variant: Rectangle, open cane
Shape: Square · Width: 100 mm · Height: 170 mm +1
Open this variant: Square, relief cane
Shape: Rectangle · Width: 180 mm · Depth: 100 mm +3
Open this variant: Wide, large-opening cane
These values are edited in the editor's template panel. A number outside the range is clamped to the nearest limit automatically.
| Size | Range | Default |
|---|---|---|
| Shape | ||
| Shape | Round, Square, Rectangle | Rectangle |
| Width | 100–210 mm | 170 mm |
| Depth * | 60–150 mm | 100 mm |
| Height | 100–220 mm | 160 mm |
| Corner radius * | 4–40 mm | 12 mm |
| Cane | ||
| Cane | Open cane (see-through), Relief (blind openings), Plain panel | Open cane (see-through) |
| Cane on the sides * | On / Off | On |
| Cane pitch * | 8–16 mm | 11 mm |
| Opening size * | 4–10 mm | 6 mm |
| Strand relief * | 0.6–1.6 mm | 1 mm |
| Frame | ||
| Stile width | 6–20 mm | 10 mm |
| Top band | 10–24 mm | 12 mm |
| Bottom band | 16–50 mm | 28 mm |
| Frame step | 0.8–1.6 mm | 1.2 mm |
| Sleeve wall | 3–4.5 mm | 3.6 mm |
| Water and drainage | ||
| Reservoir height | 10–30 mm | 18 mm |
| Sleeve floor | 2–4 mm | 2.4 mm |
| Drain hole | 3–8 mm | 5 mm |
| Wick hole | On / Off | Off |
| Inner pot | ||
| Inner pot clearance | 0.4–1.5 mm | 0.8 mm |
| Inner pot wall | 1.2–2.4 mm | 1.6 mm |
| Inner pot floor | 1.6–3 mm | 2 mm |
| Mounting | ||
| Wall gap | 5–10 mm | 6 mm |
| Screw diameter (hole +0.5) | 3–5 mm | 4 mm |
| Rail clearance | 0.15–0.6 mm | 0.3 mm |
| Printing | ||
| Part | Set, Sleeve, Inner pot, Rail | Set |
Sizes marked with a star appear in the panel only when the related shape, style or option is active.
Mint wants plenty of water and half a day of sun, and its roots spread fast. The default rectangle holds about 1.8 L of soil, 128 mm deep, enough for one plant. The panel warns below 1.5 L.
Drain holes cover the whole floor of the inner pot, and water collects in the sealed reservoir of the sleeve. The default reservoir holds about 270 mL, so do not give more per watering. The lowest opening is at least 6 mm above that water and the back has no holes, so nothing drips on the wall.
Screw the single rail level into wall plugs; the countersunk holes are 0.5 mm wider than the screw. Rest the 45° slot on the back of the sleeve on the rail and lower it; the weight pulls the planter towards the wall. A full planter weighs about 2.8 kg, so avoid drywall.
The soil sits in a solid-walled inner pot that drains only into the sealed reservoir, and the openings start above it.
Not recommended; wet soil and sun soften it. Use PETG or ASA.
No. Use wall plugs in brick or concrete.
This tool generates a parametric planter with the drainage solution you choose and exports it as an STL. Enter height, body diameter and wall thickness in millimetres, pick a silhouette and texture, choose a base type, and the model is computed in your browser.
Sizes and details: Planter
This tool combines a silhouette, a cross-section and a surface texture into a parametric vase and exports it as an STL. Enter height, body diameter and wall thickness in millimetres, pick a texture, and the model is computed in your browser so you can spin it and check.
Sizes and details: Vase
This tool builds lamp shades for pendant or table lamps and exports them as STL. Pick a silhouette: cylinder, cone, sphere slice, barrel, trumpet, egg or wavy. Add one of six hole patterns or one of eleven textures, then enter height, body diameter and wall thickness in millimetres.
Sizes and details: Lamp shadeOpen the template in the editor, enter your values and download a print-ready STL. No account needed.