3D print templates

The DrawSTL template gallery is a set of ready-made parts with adjustable dimensions. Open a template in the editor, enter values in mm and download a print-ready STL file.

Photos are illustrative; you set the dimensions in the editor.

Spur gear

Involute spur gear set by tooth count and module, with adjustable bore and hub.

Adjustable
Tooth count, module, thickness, bore, hub

Print note
Print it flat. 40% infill and 3 walls make the teeth durable.

Sizes and details: Spur gear Open in editor
Bolt and nut

Metric bolts from M3 to M10 with a matching nut; choose length and thread clearance.

Adjustable
M size, length, head height, thread tolerance

Print note
Print upright with 0.12 mm layers; threads below M5 can be weak.

Sizes and details: Bolt and nut Open in editor
Hex nut

ISO threaded nut from M3 to M12 with the same thread as the bolt template, plus custom sizes.

Adjustable
M size or across flats, height, thread diameter and pitch, tolerance

Print note
Print flat with 0.12 mm layers; threads below M5 can be weak.

Sizes and details: Hex nut Open in editor
Spacer / sleeve

Cylindrical spacer defined by outer diameter, inner diameter and length; optional edge chamfer.

Adjustable
Outer diameter, inner diameter, length, edge chamfer

Print note
Print flat; make the bore 0.2-0.3 mm larger than the screw.

Sizes and details: Spacer / sleeve Open in editor
Flanged bushing

Bearing bushing with a square flange and boss; screwed down at four corners, shaft through the middle.

Adjustable
Flange side and thickness, boss diameter and height, bore, screw hole

Print note
Prints flange down; make the bore 0.2-0.4 mm larger for a running fit.

Sizes and details: Flanged bushing Open in editor
Shaft support

Upright body with a shaft hole on a screw-down base, with 45° ribs on both sides.

Adjustable
Base size, body size, shaft diameter and axis height, ribs

Print note
Prints base down; the shaft hole has a teardrop top, so no supports are needed.

Sizes and details: Shaft support Open in editor
Plug / cap

Flanged plug that tapers towards the tip, for pipe ends and desk holes; can be hollow.

Adjustable
Plug diameter and length, tip taper, flange diameter and thickness

Print note
Prints flange down; for a snug fit make the plug 0.2 mm larger than the hole.

Sizes and details: Plug / cap Open in editor
Hinge

Knuckle hinge that prints working with built-in cone pins, or takes a separate pin.

Adjustable
Pin type, length, leaf width and thickness, knuckle count and diameter, pin clearance, screw holes

Print note
Knuckle bottoms have 45° chamfers and the pins are 45° cones, so no supports are needed.

Sizes and details: Hinge Open in editor
L bracket

Mounting bracket with adjustable arm lengths, thickness, screw holes and a gusset rib.

Adjustable
Arm lengths, width, thickness, hole diameter, rib

Print note
Print it on its side so layer lines do not split at the corner under load.

Sizes and details: L bracket Open in editor
Box with lid

Enter width, depth, height and wall thickness to get two parts that fit together.

Adjustable
Width, depth, height, wall, lid tolerance

Print note
Print the lid upside down. A 0.2 mm tolerance gives a snug fit on most printers.

Sizes and details: Box with lid Open in editor
Divider box

Organizer box with row and column dividers, finger scoops, a stackable base and a press-fit lid.

Adjustable
Width, depth, height, wall, rows and columns, divider height, scoop, stacking, lid

Print note
The stacking step has a 45° transition; boxes nest with a 0.3 mm clearance.

Sizes and details: Divider box Open in editor
Pen holder

Round, square or hex pen cup with inner compartments, a twisted body, an angled rim and side wall patterns.

Adjustable
Shape, diameter, height, wall, compartments, twist, rim angle, side pattern

Print note
Side openings use teardrop and pointed shapes, so the walls print without supports.

Sizes and details: Pen holder Open in editor
Cup

Cylindrical storage cup for pens, brushes or screws.

Adjustable
Outer diameter, height, wall, floor

Print note
A small chamfer on the bottom edge hides first-layer squish.

Sizes and details: Cup Open in editor
Vase

Fifteen silhouettes, six cross-sections and twelve surface textures, with twist, a rolled lip and a stepped pedestal.

Adjustable
Silhouette, section, texture, twist, height, body/mouth/base diameter, wall, lip, pedestal

Print note
Textures are carved inward, so the wall never gets thinner than the value you enter.

Sizes and details: Vase Open in editor
Planter

Planter with drainage: several bottom holes, feet or a built-in water reservoir, with the same textures as the vase.

Adjustable
Silhouette, section, texture, height, diameters, wall, base type, holes, feet, reservoir

Print note
The reservoir ceiling has a 45° chamfer, so the false floor is not left hanging.

Sizes and details: Planter Open in editor
Phone stand

Desk stand with adjustable angle, width and front lip height that fits phones in cases.

Adjustable
Angle, width, lip height, base length

Print note
Prints on its side without supports. 20% infill is enough.

Sizes and details: Phone stand Open in editor
Wall hook

Screw-on plate with a J hook, square-tipped arm or knob peg, or a plate-free single strap hook.

Adjustable
Hook type and section, hook count, plate size, reach, drop, hook radius, tip lift, screw holes

Print note
The plate prints back-down; the strap hook prints on its side without supports.

Sizes and details: Wall hook Open in editor
Handle

Drawer and cabinet pull, set hole-to-hole to furniture sizes such as 96, 128 or 160 mm.

Adjustable
Screw spacing, height, bar thickness and width, corner, feet, screw hole

Print note
The feet print on the bed; the screw hole never ends up under the leg.

Sizes and details: Handle Open in editor
Cable clip

C clip sized to the cable; press it in from above and screw the two tabs down.

Adjustable
Cable diameter, mouth width, wall, width, screw hole

Print note
Print base down; the top of the loop is a 45° teardrop, no supports needed.

Sizes and details: Cable clip Open in editor
Cable tie mount

Screw or adhesive base that holds a cable tie through two slots against the wall.

Adjustable
Width, depth, thickness, slot size, screw hole

Print note
Prints with the channelled rear face up; that face goes against the wall.

Sizes and details: Cable tie mount Open in editor
Spike strip

Bird and climbing deterrent for walls and sills; staggered cone or star spikes.

Adjustable
Length, width, honeycomb cell, row spacing, spike type, height and diameter

Print note
Prints base down; keep the tip at least 1.2 mm for a 0.4 mm nozzle.

Sizes and details: Spike strip Open in editor
Gridfinity baseplate

42 mm Gridfinity floor plate sized in cells to your drawer; plain, with magnet pockets or with screw holes.

Adjustable
Cells X and Y, style (plain, magnet, screw), frame width, corner radius

Print note
The base profile follows Gridfinity dimensions exactly; prints flat side down without supports.

Sizes and details: Gridfinity baseplate Open in editor
Gridfinity bin

Stackable divided bin that drops into a Gridfinity plate, with optional finger scoop and label shelf.

Adjustable
Cells X and Y, 7 mm height units, wall, dividers X and Y, finger scoop, label shelf, stacking lip, magnets

Print note
Prints base down; the label shelf has a 45° underside, so no supports are needed.

Sizes and details: Gridfinity bin Open in editor
Battery organizer

Battery box with sized pockets for AA, AAA, 18650, 21700, 9V and CR2032, optional Gridfinity base.

Adjustable
Battery type, rows, columns, pocket depth, hole clearance, wall between pockets, label strip, Gridfinity base

Print note
Pockets open upward, no supports; 0.4-0.6 mm hole clearance gives a good fit.

Sizes and details: Battery organizer Open in editor
Deck box

Box for TCG cards sized from the card count; sliding lid on rails or cap lid, with finger notches.

Adjustable
Card size, card count and thickness, lid type, lid clearance, wall, finger notch

Print note
Box and lid print side by side as two parts; 0.2-0.3 mm lid clearance slides well.

Sizes and details: Deck box Open in editor
Tool holder

Rack with holes for screwdrivers, pliers and scissors; wall screws, desk edge or free standing.

Adjustable
Hole type, number of holes, size and spacing, slot length, shelf depth, thickness, mounting, print orientation

Print note
Prints with the back plate on the bed or upright on a 45° brace; neither needs supports.

Sizes and details: Tool holder Open in editor
Pegboard hook

Six hook types for 40 mm pitch slotted boards or 1 inch pegboard: hook, double hook, peg, U, shelf and ring.

Adjustable
Board type, hook type, length, tip lip, thickness, body width, slot tolerance, board thickness

Print note
Prints on its side without supports; the board tab is narrowed by the tolerance.

Sizes and details: Pegboard hook Open in editor
Headphone hanger

Headphone hook with desk edge clamp, under-desk or wall mounting and a curved headband cradle.

Adjustable
Mounting, arm length, cradle width and curve, desk thickness, clamp tolerance, cable hook

Print note
The profile prints flat on the bed; PETG is recommended for the clamp.

Sizes and details: Headphone hanger Open in editor
Bag clip

One-piece bag clip with a spring loop; hook and catch lock or spring U, toothed jaws.

Adjustable
Lock type, length, jaw thickness, clip width, spring thickness, teeth

Print note
Spring strain is calculated in the panel; PETG is suggested when PLA limits are exceeded.

Sizes and details: Bag clip Open in editor
Furniture riser

Bed and desk leg riser: leg socket, wide 45° chamfered base, honeycomb partitions, anti-slip bottom.

Adjustable
Base and socket shape, lift, leg size, tolerance, socket depth, wall, honeycomb, anti-slip

Print note
Load-bearing part: at least 4 walls and 40% infill are recommended.

Sizes and details: Furniture riser Open in editor
Lamp shade

Perforated or textured lamp shade: seven silhouettes, six hole patterns, E27/E14 plate or spider ring.

Adjustable
Silhouette, hole pattern, texture, height, body diameter, wall, fitting, vase mode

Print note
Use LED bulbs only; PLA deforms with heat, PETG or ASA is recommended.

Sizes and details: Lamp shade Open in editor
Tube squeezer

Wind-up key or twin-roller slider that empties a toothpaste tube to the last bit.

Adjustable
Type, tube width, slot gap, thickness, edge rounding

Print note
Slot length is calculated as tube width + 2 mm.

Sizes and details: Tube squeezer Open in editor
Lid organizer

Slotted rack that keeps food container lids upright in a drawer.

Adjustable
Divider shape, slot count, slot width, divider thickness and height, base depth, Gridfinity

Print note
The height to wall ratio is shown in the panel with a warning for thin dividers.

Sizes and details: Lid organizer Open in editor
Sponge holder / drip tray

Self-draining sponge holder with a spout, or a glass drip tray with a grid.

Adjustable
Type, width, depth, height, wall, drain slope, pattern, spout width

Print note
The floor slopes towards the spout in two directions, so no water pools.

Sizes and details: Sponge holder / drip tray Open in editor
Coaster

Coaster with a raised rim, relief or engraved pattern and an optional set holder.

Adjustable
Shape, pattern, finish, size, thickness, rim, cord groove, set holder

Print note
The pattern stays on the surface so the coaster does not leak; the pierced option carries a warning.

Sizes and details: Coaster Open in editor
Bottle rack

Stackable rack module that holds bottles lying down, side by side and on top of each other.

Adjustable
Bottle count, bottle diameter, bed clearance, depth, wall, pins, back stop

Print note
Row height and bed radius are calculated in the panel.

Sizes and details: Bottle rack Open in editor
Broom holder

Gravity locking wall holder for broom and mop handles; a loose roller in a sloped channel.

Adjustable
Number of holders, handle diameter range, channel angle, roller diameter, screw hole and countersink

Print note
Body prints upright, rollers flat; no supports.

Sizes and details: Broom holder Open in editor
Cable grommet

Flanged desk cable grommet that sits in the desk hole; slotted, comb or closed cap.

Adjustable
Hole diameter (35, 50, 60, 80 mm), desk thickness, flange, fit tolerance, cap type, slot

Print note
Body prints flange down, cap top face down.

Sizes and details: Cable grommet Open in editor
Desk cup holder

Mug holder that clamps to a desk edge; basket with a bottom or tapered ring, handle slot.

Adjustable
Cup diameter, basket height, taper, desk thickness, clamp depth, handle slot

Print note
Prints upside down; PETG recommended for the clamp.

Sizes and details: Desk cup holder Open in editor
S-hook

Strong flat hook for rods, closet rails or the top of a door.

Adjustable
Hook type, rod diameter or door thickness, bottom opening, length, section, tip lip

Print note
Prints lying flat; layers run along the load.

Sizes and details: S-hook Open in editor
Paper towel holder

Countertop stand with a heavy base, or a two bracket holder for a wall or under a cabinet.

Adjustable
Mounting, roll width and diameter, core inner diameter, base shape and pattern, fit tolerance

Print note
Rod pieces join with a pin; every part fits the bed.

Sizes and details: Paper towel holder Open in editor
Wall planter (cane)

Woven Vienna cane wall planter on a one-piece hidden rail: sleeve, inner pot and water reservoir.

Adjustable
Shape, width, depth, height, cane (open, relief, plain), opening and pitch, strand relief, frame, reservoir, rail

Print note
Soil volume, reservoir and wet weight are calculated in the panel.

Sizes and details: Wall planter (cane)Open in editor
Name tag and keychain

Plate with raised text and a ring hole; change the text, text size and corner radius.

Adjustable
Text, text size, plate size, hole, corner radius

Print note
Swap filament at the first text layer for a two-colour print.

Sizes and details: Name tag Open in editor
Vent grille

Screw-on grille with a round, square or hex frame and spiral, radial, venturi, hole, honeycomb, grid or line patterns.

Adjustable
Frame, pattern, outer size, opening and rib, screws and countersink, back collar

Print note
Print it face down; the countersinks and collar need no supports.

Sizes and details: Vent grille Open in editor
Duct vent

Flanged vent that slides into a round or rectangular duct, with a patterned grille face, louvers, a conical diffuser, an open ring or a blind cap.

Adjustable
Duct size, flange, sleeve depth and slits, insert type, pattern, blade count and angle, tolerance

Print note
Print it face down with the sleeve rising; blades stay at 45° or less, so no supports are needed.

Sizes and details: Duct vent Open in editor
Drain strainer

Shower and sink strainer with a round or square cap, a footed, skirted or basket body and venturi or spiral slots or hole patterns.

Adjustable
Cap shape and size, body type, pattern, slot count, twist and flare, hub, center screw, feet

Print note
Footed and skirted bodies print cap-face down; the basket prints on its perforated floor with a 45° cone under the flange, so no supports are needed.

Sizes and details: Drain strainer Open in editor
Pipe flange

Round flange and neck that slides over a pipe end; bolt count and circle are adjustable.

Adjustable
Flange diameter and thickness, neck, bore, bolt count, hole and circle

Print note
Prints flange down; make the bore 0.3 mm larger to slide over the pipe.

Sizes and details: Pipe flange Open in editor
Pool drain basket

Straight cylinder basket with a thin flange that drops into a drain hole; bar grid or perforated floor and side holes that keep water flowing.

Adjustable
Drain hole diameter, fit tolerance, basket depth, wall, flange diameter and thickness, floor pattern, side pattern, print orientation

Print note
Prints flange-down; the cylinder meets the flange at a sharp corner and the bar grid floor is a two-layer bridge. No supports needed.

Sizes and details: Pool drain basket Open in editor
Skimmer basket

Pool skimmer basket with a perforated floor and side wall, a 45° chamfered seating lip, and a bail handle or finger-hole tabs.

Adjustable
Basket diameter and height, wall, floor pattern, side pattern, lip width and thickness, handle

Print note
Prints floor-down; a 45° cone carries the lip and the tab holes are teardrops. The default size fits a 220 mm bed.

Sizes and details: Skimmer basket Open in editor
Main drain cover

Lightly domed pool main drain cover with radial slots on top, vertical slots in the side band and a countersunk screw seat ring.

Adjustable
Round or square frame, diameter, dome and side band height, shell, top pattern, side pattern, seat ring, screw count

Print note
Prints on its flat bottom edge; the dome shell spans open air underneath, so the cover needs supports.

Sizes and details: Main drain cover Open in editor
Overflow grating

End-to-end interlocking grating module for pool overflow channels with transverse or longitudinal bars or a perforated plate and anti-slip grooves.

Adjustable
Channel width, module length, height, pattern, bar thickness and gap, anti-slip grooves, tongue and groove, feet or lips

Print note
Prints upside down with the walking face on the bed; grooves, tongue and slot roof are 45°, so no supports are needed.

Sizes and details: Overflow grating Open in editor