Home and desk
This tool combines a silhouette, a cross-section and a surface texture into a parametric vase and exports it as an STL. Enter height, body diameter and wall thickness in millimetres, pick a texture, and the model is computed in your browser so you can spin it and check.
The three controls are independent: the silhouette sets the side profile, the cross-section runs from triangle to octagon, and the texture is carved into that envelope. Adding twist rotates section and texture together. Because textures are carved inward, the wall never drops below the value you entered.
Free, no sign-up. Change the sizes in millimetres and download the STL.
Each variant is the same template with different settings. Follow the link and the editor opens with those values.
Silhouette: Cone · Cross-section: Hexagon · Corner softness (%): 36 +8
Open this variant: Cone silhouette, twisted hex
Silhouette: Amphora · Cross-section: Circle · Surface texture: Flutes +8
Open this variant: Amphora silhouette, flutes
Silhouette: Barrel · Cross-section: Circle · Surface texture: Scales +8
Open this variant: Barrel silhouette, scale texture
Silhouette: Monument · Cross-section: Square · Corner softness (%): 40 +14
Open this variant: Monument form, stepped pedestal
Silhouette: Wavy · Wave count: 5 · Cross-section: Circle +9
Open this variant: Wavy silhouette, voronoi textureThese values are edited in the editor's template panel. A number outside the range is clamped to the nearest limit automatically.
| Size | Range | Default |
|---|---|---|
| Shape | ||
| Silhouette | Cylinder, Cone, Trumpet, Barrel, Egg, Amphora, Bottle, Hourglass, Double bulge, Goblet, Onion, Wavy, Monument, Column, Urn | Cone |
| Cross-section | Circle, Triangle, Square, Pentagon, Hexagon, Octagon | Hexagon |
| Surface texture | Plain, Flutes, Prism, Ripples, Chevron, Terraces, Bubbles, Honeycomb, Diamond, Basket weave, Scales, Voronoi | Plain |
| Corner softness (%) * | 0–100 | 36 |
| Body twist * | 0–1080 ° | 140 ° |
| Curve strength (%) * | 0–160 | 100 |
| Wave count * | 2–12 | 5 |
| Dimensions | ||
| Height | 40–300 mm | 160 mm |
| Body diameter | 40–180 mm | 90 mm |
| Mouth diameter (% of body) | 20–100 | 100 |
| Base diameter (% of body) | 20–100 | 56 |
| Wall thickness | 0.8–6 mm | 1.6 mm |
| Floor thickness | 0.8–10 mm | 2.4 mm |
| Texture | ||
| Repeats around * | 3–60 | 30 |
| Repeats up * | 2–40 | 14 |
| Texture depth * | 0.2–8 mm | 2.6 mm |
| Lip and pedestal | ||
| Mouth lip | 0–40 mm | 0 mm |
| Lip height (%) * | 5–40 | 12 |
| Pedestal | None, Round, Square | None |
| Steps * | 1–4 | 2 |
| Pedestal height * | 4–90 mm | 24 mm |
| Pedestal overhang * | 2–70 mm | 18 mm |
| Pedestal chamfer * | 0–8 mm | 1.5 mm |
Sizes marked with a star appear in the panel only when the related shape, style or option is active.
Vase or spiral mode in a slicer prints the object as one continuous wall: it is fast, and with no infill or wall transitions the surface is unbroken. The catch is that the slicer ignores your wall thickness in this mode and prints a single line, so the part does not hold water.
Among the fifteen silhouettes, cylinder, cone and trumpet are plain; barrel, egg, amphora, bottle, hourglass, double bulge, goblet, onion and wavy are curved; and monument, column and urn arrive with thick-walled, pedestalled presets. The bulge control strengthens or flattens the curve of any silhouette.
A PETG vase printed in normal mode with 3 perimeters and a solid floor does hold water in practice. Even so, dropping a glass or plastic bottle inside is the safest route.
Reduce the mouth diameter percentage, lower the bulge, or shrink the body diameter. The steepest part of the silhouette responds to all three, and you can always print with supports instead.
No. The texture is carved in from the outer envelope and the inner surface is offset by the same amount, so the wall never drops below your value. If the narrowest part of the silhouette forces a thinner wall, the panel says so.
This tool generates a parametric planter with the drainage solution you choose and exports it as an STL. Enter height, body diameter and wall thickness in millimetres, pick a silhouette and texture, choose a base type, and the model is computed in your browser.
Sizes and details: Planter
This tool generates a pen holder at the diameter and height you type in and exports it as an STL. Choose the body shape, set wall and floor thickness, add compartments if you want them, and the model updates in the browser so you can spin it and check.
Sizes and details: Pen holder
This tool generates a cylindrical cup defined by four numbers and exports it as an STL. Enter the outside diameter, height, wall thickness and floor thickness in millimetres, and the model is computed in your browser ready to download.
Sizes and details: CupOpen the template in the editor, enter your values and download a print-ready STL. No account needed.