Home and desk
This tool generates a stackable rack module that holds wine, water and juice bottles lying down and exports it as STL. You enter the number of bottles side by side (1-4), bottle diameter, bed clearance, module depth and wall thickness in millimetres. The top of the module has half-round beds where bottles lie and the underside has arches of the same radius.
The bottom profile of the upper module is the inverse of the top profile of the lower one: the upper module sits on the peaks of the lower one and each bottle lies in a full circle between two modules. The load goes from module to module through the peaks, not through the bottles.
Free, no sign-up. Change the sizes in millimetres and download the STL.
Each variant is the same template with different settings. Follow the link and the editor opens with those values.
Bottles side by side: 2 · Bottle diameter: 76 mm · Bed clearance (radius): 1 mm +4
Open this variant: Wine bottle, 2-wide module
Bottles side by side: 2 · Bottle diameter: 90 mm · Bed clearance (radius): 1.2 mm +4
Open this variant: 1.5 L water bottle, 2-wide
Bottles side by side: 1 · Bottle diameter: 76 mm · Bed clearance (radius): 1 mm +5
Open this variant: Single, 120 mm deep, back stopThese values are edited in the editor's template panel. A number outside the range is clamped to the nearest limit automatically.
| Size | Range | Default |
|---|---|---|
| Shape | ||
| Bottles side by side | 1–4 | 2 |
| Dimensions | ||
| Bottle diameter | 60–110 mm | 76 mm |
| Bed clearance (radius) | 0.5–3 mm | 1 mm |
| Module depth | 30–120 mm | 60 mm |
| Wall thickness | 2–6 mm | 3 mm |
| Options | ||
| Locating pins and sockets | On / Off | On |
| Pin clearance * | 0.1–0.5 mm | 0.25 mm |
| Back stop | On / Off | Off |
Sizes marked with a star appear in the panel only when the related shape, style or option is active.
Bed radius is the bottle radius plus the bed clearance; a 76 mm wine bottle with 1 mm clearance gives 39 mm. Neighbouring beds are separated by a wall of the chosen thickness. Row height is two bed radii plus the wall thickness and is shown in the panel. End columns are 10 mm wide and carry the pins.
End columns carry 4 mm pins on top and matching sockets underneath, with the chosen clearance on every face, so modules cannot slide. A full bottle has its centre of gravity about 110 mm from the base, so a single row only balances with the back stop on and a depth of 118 mm or more; otherwise the panel asks for two rows. With two rows the stop goes on the back module only.
All modules are identical; the bottom arches stay empty and the rack stands on the feet between them and on the end columns.
With PLA and a 3 mm wall four or five rows are fine. For taller stacks use a 4 mm wall and lean the rack against a wall.
Use fewer bottles side by side; a two bottle module for wine or 1.5 L water fits a 220 mm bed, and the panel warns above that.
This tool builds a riser that goes under the leg of a bed, desk, sofa or cabinet and exports it as STL. Enter the leg size, the lift height (20-150 mm) and the socket depth in millimetres; the leg sits in the socket on top and the socket floor is exactly at the lift height.
Sizes and details: Furniture riser
This tool builds a screw-on wall hook to your measurements and exports it as an STL. Pick a hook style, type the plate size and how far the hook should reach out in millimetres, set the screw holes, and the model is computed in your browser.
Sizes and details: Wall hook
This tool generates coasters for tables and side tables and exports them as STL. Choose a circle, square or hexagon and enter diameter, base thickness and rim lip height in millimetres. A sunflower spiral, radial, honeycomb, square, groove or hole ring pattern is added to the top as relief or engraving.
Sizes and details: CoasterOpen the template in the editor, enter your values and download a print-ready STL. No account needed.